Focke Wulf Fw190 A5/6/7/8/9

General specifications:

This outstanding model was developed using Shigeru Nohara drawings to maintain strict scale accuracy. It uses NACA 2416 airfoil at the root converging to a NACA 2411 at the tip. 

The A model can be easily converted to the F/G  variant  

Construction: Fiberglass fuselage with detachable cowl and a built up wing and stabilizer allow for a fast completion of this complex airplane. Literally savings months of building.   All the hard work is done for the builder. The formers and firewall are laser cut and ready to install after general sanding.  

All panel lines and hatches are molded into the high quality fiberglass!

Wing: A light but strong wing using laser cut Lite ply and balsa parts. The Sub leading edge and rear spar are slotted to provide the correct separation between ribs. A box center section allows a split wing for storage and shipping.

The Horizontal Stabilizer is also built up from balsa laser cut parts that have correct fit. Ailerons, Flaps, Elevators a Rudder are built from laser cut parts with the correct shaped lighting holes. These parts require to be covered with fabric type film, to be scale and light.

Wing  designed around Sierra Giant scale retractable landing gear.

Wood kit is all laser cut with well over 350 exact fitting parts. Pictures show built control surfaces with kit parts. Ply firewall included. 

Summer 2024: F/G parts delivery time is 5 weeks from date of order.  Wood kit 2 weeks.

Fiberglass fuselage with molded panel lines and hatches, cowl, canopy frame* and gun hood. $585

 

 

*specify canopy flat or blown style *

Over 350 Laser Cut ply and balsa parts for wing, tail surfaces, firewall and fuselage formers  $365

 

 

 

 Canopy clear section (early flat type) $37         Canopy clear section (late blown type) $47    Gear door vacuum formed lining  $28