1/5 scale kit (Sold Out)
Courtesy of Todd Burley
Fw190 D9 Kit contents:
� All fiberglass parts gel
� 70% of the model is produced in
sandwich composite (honeycomb) technology.
� 2-piece wing with 30mm/
1-11/64" aluminum tubing, retract mount etc.
� 3-piece scale retract door.
� 2-piece elevator unit with 14mm/ 35/64" aluminum
. 1-piece cowl
� CNC milled bulkheads from
wood-fiberglass plate and carbon fiber sandwich plate.
� CNC aluminum scale Guns from
for fuselage and wings.
� Vac - formed plastic details
� Vac- formed clear plastic
canopy with fiberglass canopy frame (earlier model).
� Aileron and elevator
attachment with 2mm steel wire and G10 Hinges.
� Rudder and landing flap
attachment 3mm/ 7/64" pins and G10 Hinges.
� CNC milled rudder horns from G10.
� Illustrated instruction with parts
The model has over 7000 rivets, approx.
250 visible screws, rudder and elevators have a fabric covered
appearance with stitching tape as on the original aircraft,
true to scale hinges and pivot points
* Shipping will be
calculated at the time of sale.
� Wingspan: 2100mm / 83
� Length 2000 mm / 82 inches
� Flying weight 8-11 kgs /
� Power: 45-62
cm3 gasoline or
Copyright � 2004 - 2007 Fliteskin