Accessories for the 1/5 scale Fw190

Spinner & functional fan assembly for A models. $169.00

luefterrad_spinner.jpg

 Spinner (functional) for D models.   $85.00

d9pinner.jpg

G45/62 Shock absorbing Motor Mount: This engine mount is designed so that the engine mounts at the correct thrust angle. The system also correctly locates the propeller hub in the center of the cowl. $117.00

motorspant.jpg

 

Stainless Steel muffler designed to fit completely under the cowl of the Focke Wulf. It is not visible with the cowling on. The muffler exhaust tube is centrally located in the lower cowling, and provides for exhaust to exit at the same location as the original aircraft, with the exhaust tube ending at the rear lower cowl edge. If the (Z)G45 engine/SisT muffler is selected for power, the complete power system is completely hidden within the cowling. In case of use the (Z)G62, only the spark plug protrudes approx. 3mm on the port blister of the cowl. $198.00

schalld2.jpg

Drop Tanks (2 styles) : $Call

tank_flat_2.jpgtank_round_1.jpg

Scale Propeller (A & D): $call

aprop2.jpgdprop2.jpg

 

Landing Gear manufactured from Sierra Precision.

Superb quality and scale detail, functional downlink arm.

Mains: $495.00 

Tail : $109.00 

Door Collars (6): $35.00

FW190-Gear.jpg

 

 

 Scale Wheels:

Fw190wheelB.jpg

Light and firm. 8oz each. specially designed for 1/5 scale Fw190.  $79.50 (each)

 

 

Custom Laser Cut Parts: These were designed to fit the SisT or any 1/5 scale Fw190. They will build very scale and about half the weight of the molded Fiberglass parts. They require fabric (Solartex or similar) covering.

Items: Ailerons, Flaps, Elevators, Rudder, Cockpit hatch, Instrument hood, Head Armor.  Photos courtesy of Dave Tilbury.

sist6panels.jpgIMG_1340.JPG

 sist65[1].JPG

sist57.jpg

$125.00 + shipping.

 

 

 

 

 Copyright © 2004 - 2008 Fliteskin Products